Ambrosia Garden Archive
    • Ambrosia Garden Archive

    • How do I get voiceprints? Where tel #s?

       Uplink
      3 5 298
      G
      G

      I'm trying to hack into systems that require a voiceprint. I've read in the FAQ that I can get info from InterNIC that will help with this, but where are the telephone numbers for the admin people?

      Thanks

      ------------------

      0
    • M
      M

      Quote

      Originally posted by glynnor92831:
      **I'm trying to hack into systems that require a voiceprint. I've read in the FAQ that I can get info from InterNIC that will help with this, but where are the telephone numbers for the admin people?

      Thanks

      **

      Connect to the InterNIC and find the company's Public Access Server. This will contain contact information for the Administrator of the system. Add that to your list of links and then dial him up next. Make sure you have the Voice Analyzer activated and don't close the application until you've used it on the system and are done with it. It doesn't store voice prints for you unless it remains open.

      ------------------
      Everything that has a beginning, has an end!
      -Matrix: Revolutions

      0
    • T
      T

      Oh, this one's easy enough, but it takes a couple of steps.

      Suppose you wanted to hack, say, Disposable Widgets Corp's mainframe. The mission mail gives you the mainframe IP, but that's just not enough.
      Browse on InterNIC for the Disposable Widgets Corp "Public Access Terminal". Typing in the corporation name in the filter space generally shows all the various ips for its systems.
      Go to the public terminal (with or without bouncing, it's up to you; depends on how paranoid you get.) You can't do much here, but it will show you the corp. president and system admin's phone numbers.
      Check on the sys-admin's phone number.
      Call him up. Again, bounce or don't bounce.
      Get the voice-analyzer up and running before the guy starts talking, and leave it open.

      You've got a voiceprint now.

      I think you've got the other things taken care of, so I won't mention them.

      ------------------
      Getting on everybody's nerves since 1999.

      0
    • G
      G

      This sounds simple but I don';t know how to do 2 of the things you suggested.
      1. How do I add a telephone number to my list of links? I can't see an ADD LINK button.
      2. How do I call him? I can't see software that is used as a telephone, and I don't see any other way. Do I just call him by double clicking on this tel # when it is added to my links?

      Thanks

      ------------------

      0
    • T
      T

      Quote

      Originally posted by glynnor92831:
      **This sounds simple but I don';t know how to do 2 of the things you suggested.
      1. How do I add a telephone number to my list of links? I can't see an ADD LINK button.
      2. How do I call him? I can't see software that is used as a telephone, and I don't see any other way. Do I just call him by double clicking on this tel # when it is added to my links?

      Thanks
      **

      On the public access server screen, the two phone numbers have the little plus box next to them, unless they've already been checked (in which case it's hanging around your own gateway link directory.
      If that still doesn't work, worry not, there's still a way to get that link. Just put the target's phone number as listed on the public access server screen into the IP probe (don't forget parenthesis). It'll bring up the sysadmin's phone system. To record, just go to the link that is given with the voice analyzer running; no extra equipment is necessary (not even a microphone is needed, since you don't really talk 🙂 ).

      Hope this helps.

      ------------------
      Getting on everybody's nerves since 1999.

      0